×

Partner Log-in

Hytera may use cookies for functionality, analytics, and advertising purposes as described in our Cookie Policy. By continuing to use our website, you agree to our use of cookies.

RD98X

Professional Digital Repeater

Professional Digital Repeater

Distinguished by modularized design, excellent heat dissipation and handy management, the repeater delivers you more than reliability.

DOWNLOAD BROCHURE
CONTACT US

Repeater Diagnostic And Control (RDAC)
RD98X supports remote (Internet connection via network port) and local diagnostic (via USB) PC applications to monitor, diagnose and control the repeater status, thus increasing the maintenance efficiency. Hytera’s developed RDAC is able to support multiple master network connections so that the radio administrator can monitor multiple radio networks upcoming.

Dual Slot digital audio streaming
RD98X supports streaming of both the voice slots via the rear port accessory pins, allowing third party for capability expansion.

Analog Digital Autoswitch
RD98X supports Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and Digital users during the digital migration.

IP Multi-site Connect
RD98X supports network interconnect via the IP port of repeater to form a private radio network, allowing wide area coverage to meet dispersed locations data and voice communications.

50W high power
RD98X supports a maximum repeating power of 50W, thus increasing the system coverage with lesser setup equipment.

16 channels
RD98X supports a maximum of 16 channels, allowing efficient radio network control in different scenarios. The channel change can be performed either via RDAC PC tools, via the repeater's front panels channel knob and via the channel steering from the repeater's rear port.

Analog/Digital Operating mode
RD98X supports operating mode of Analog and Digital.

Analog/Digital back to back interconnect
RD98X supports different operating mode of Analog and Digital to interconnect for voice cross patch, allowing Analog users to communicate to the Digital users and vice versa. This has allowed the smooth migration for Analog users to the digital world!

Analog Repeater Knockdown
RD98X supports repeater knockdown, that when activated via the repeater's rear accessory pin, will disabled the transmit path of the repeater.

Multi-tone Decode
RD98X supports decoding up to maximum of 16 CDCSS/CTCSS in Analog channels, allowing repeating of different Analog voice users from various groups.

Analog Scan
RD98X supports Analog voice and signaling scan, allowing repeating of different Analog voice users from various groups.

Repeater Access Management
RD98X supports radio users access control to the repeater, allows better security to prevent un-authorized users from accessing the radio network.

Analog/Digital Telephone Interconnect (via DTMF signaling)
RD98X supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial Off The Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).

Continuous Wave Identification (CWID)
RD98X supports Analog transmission of the repeater identification in Morse code format.

RD98X, X=0,2,5,6,8,Model number varies geographically.

 

General

Frequency

UHF1: 400-470MHz

UHF2: 450-520MHz

UHF3: 350-400MHz

 

VHF:  136-174MHz

Channel Capacity 16
Channel Spacing 12.5kHz/20kHz/25kHz
Operating Voltage

Standby<0.8A

Transmit<11A

Frequency Stability ±0.5ppm
Antenna Impedance 50Ω
Duty Cycle 100%

Dimensions (H×W×D)

88 X 483 X 366 mm

Weight 8.5 kg
LCD Display 220*176 pixels, 262000 colors2.0 inch, 4 rows

Transmitter

RF Power Output 5-50W
FM Modulation

11K0F3E @ 12.5kHz

14K0F3E @ 20kHz

16K0F3E @ 25kHz

4FSK Digital Modulation

12.5kHz Data Only: 7K60FXD

12.5kHz Data & Voice: 7K60FXW

Conducted/Radiated Emission

-36dBm <1GHz

-30dBm >1GHz

Modulation Limiting

±2.5 kHz @ 12.5 kHz

±4.0 kHz @ 20 kHz

±5.0 kHz @ 25 kHz

FM Hum & Noise

40dB @ 12.5 kHz

43dB @ 20 kHz

45dB @ 25 kHz

Adjacent Channel Power

60dB@12.5kHz

70dB@20 /25kHz

Audio Response +1 ~ -3dB
Audio Distortion ≤3%
Digital Vocoder Type AMBE++ or SELP
Digital Protocol ETSI-TS102 361-1,-2,-3

Receiver

Sensitivity

Analog: 0.3μV (12dB SINAD)

             0.22μV (Typical) (12dB SINAD)

             0.4μV (20dB SINAD)

Digital: 0.25uV/BER5%

Adjacent Channel Selectivity

TIA-603

ETSI

65dB @ 12.5 kHz ;75dB @ 20/25 kHz

65dB @ 12.5 kHz ;75dB @ 20/25 kHz

Intermodulation

TIA-603

ETSI

75dB @ 12.5/20/25 kHz

70dB @ 12.5/20/25 kHz

Spurious Response Rejection

TIA-603

ETSI

80dB @ 12.5/20/25 kHz

80dB @ 12.5/20/25 kHz

Blocking 

TIA-603 

ETSI

90dB

90dB

Hum and Noise

40dB @ 12.5 kHz

43dB @ 20 kHz

45dB @ 25 kHz

Rated Audio Power Output

0.5W

Rated Audio Distortion ≤3%
Audio Response +1 ~ -3dB
Conducted Spurious Emission <-57dBm

 *All specifications are subject to change without notice due to continuous development.

Live Chat