×

Partner Log-in

Hytera may use cookies for functionality, analytics, and advertising purposes as described in our Cookie Policy. By continuing to use our website, you agree to our use of cookies.

RD62X

Digital Wall Mount Repeater

Digital Wall Mount Repeater

RD62X is a 25W, DMR and Analog dual mode repeater in a compact design, embedded with a mini duplexer and power supply. Its innovative design enables it to easily support wall-mount installation with AC/DC power. Its DMR and analog features meet voice and data requirements and help make smooth digital migration cost-effectively. Multiple sites can connect via IP to support flexible wide area and large building coverage, both indoor and outdoor.

DOWNLOAD BROCHURE
CONTACT US

Multiple Sites via IP

RD62X supports network connection via the IP port of repeater to form a private radio network, thus meeting data and voice communication needs for wide-area coverage and dispersed locations.
 
Digital Audio Streaming of Dual Time Slots
RD62X supports the streaming of both the voice slots via the rear port accessory pins, allowing for capability expansion via future development.
 
Analog/Digital Operating Mode
RD62X can work in either analog or digital mode.
 
Analog Scan
The RD62X supports Analog voice and signaling scan, allowing coverage of different analog voice users from various groups.
 
Repeater Diagnostic And Control (RDAC)
RD62X supports Remote IP connection to monitor, diagnose and control the repeater, thus increasing maintenance efficiency. The Hytera developed RDAC is able to support multiple master network connection, allowing the radio administrator to monitor multiple radio networks.
 
AC/DC Auto Switch
RD62X integrates an internal power supply that supports battery floating charge. The power supports 13.6V±15% DC and 90V-264V AC. If the AC power is cut off, the DC power (battery) automatically takes over without interruption.
 
Analog/Digital Back-to-Back Interconnect
RD62X supports different operating modes of Analog and Digital to interconnect for voice cross patch, allowing analog users to communicate with digital users and vice versa. This allows for a smooth migration for Analog users to the digital world.
 
Multi CTCSS/CDCSS Decode
RD62X supports decoding up to a maximum of 16 CDCSS/CTCSS codes in Analog channels, allowing coverage for different Analog voice users from various groups.
 
Analog/Digital Telephone Interconnect
RD62X supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial off the Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).
 
Analog/Digital Auto Switch
RD62X supports Analog and Digital channel auto switching, allowing for efficient frequency sharing between Analog and Digital users and an easy digital migration.
 
All-In-One Compact Design 
RD62X's compact design, integrates RF, Power supply, and duplexer into one box, which makes RD62X smaller, lighter, and easier for wall-mount installation and indoor coverage.
 
Repeater Access Management
RD62X supports a repeater access control feature allowing better security to prevent unauthorized users from accessing the radio network.
 
Notes: RD62X, X=0, 2, 5 or 8, model number varies geographically. For details, please contact our regional sales representatives.

General

 

Frequency 136-174MHz, 400-470MHz
Channel Capacity 16
Channel Spacing 12.5kHz/20kHz/25kHz
Operating Voltage
13.6±15%V DC
100V-240V AC
Current Drain

Standby≤0.5A

Transmit≤5.5A

Frequency Stability ±0.5ppm
Antenna Impedance 50Ω
Duty Cycle 100%
Dimensions (H×W×D) 210x348x108mm
Weight 5 kg

Transmitter

RF Power Output 1-25W Continuous
FM Modulation
11K0F3E@12.5kHz
14K0F3E@20kHz
16K0F3E@25kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD
12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission
-36dBm <1GHz
-30dBm >1GHz
Modulation Limiting
±2.5 kHz @ 12.5 kHz
±4.0 kHz @ 20 kHz
±5.0 kHz @ 25 kHz
FM Hum & Noise
40dB @ 12.5 kHz
43dB @ 20 kHz
45dB @ 25 kHz
Adjacent Channel Power
60dB@12.5kHz
70dB@20 /25kHz
Audio Response +1 ~ -3dB
Audio Distortion ≤3%
Digital Vocoder Type AMBE++ or SELP
Digital Protocol ETSI-TS102 361-1,-2,-3

Receiver

Sensitivity

Analog: 0.3μV (12dB SINAD)

            0.22μV (Typical) (12dB SINAD)

            0.4μV (20dB SINAD)

Digital: 0.3uV/BER5%

Adjacent Channel Selectivity
 TIA-603: 65dB @ 12.5 kHz ;75dB @ 20/25 kHz
ETSI: 60dB @ 12.5 kHz ;75dB @ 20/25 kHz
Intermodulation
TIA-603: 75dB @ 12.5/20/25 kHz
ETSI: 70dB @ 12.5/20/25 kHz
Spurious Response Rejection
 TIA-603: 75dB @ 12.5/20/25 kHz
ETSI: 70dB @ 12.5/20/25 kHz
Blocking
 TIA-603: 90dB
ETSI: 84dB
Hum and Noise
40dB @ 12.5KHz
43dB @ 20KHz
45dB @ 25KHz
Rated Audio Distortion ≤3%
Audio Response +1 ~ -3dB
Conducted Spurious Emission <-57dBm

 

RD62X, X=0, 2, 5,6 or 8, model number varies geographically. For details, please contact our regional sales representatives.

All specifications are subject to change without notice due to continuous development.

Live Chat