×

Partner Log-in

Hytera may use cookies for functionality, analytics, and advertising purposes as described in our Cookie Policy. By continuing to use our website, you agree to our use of cookies.

RD98XS

Intelligent Super Repeater

Intelligent Super Repeater

RD98XS is a 50W, DMR and analog dual mode upgradable repeater which can work in analog and DMR conventional modes. It can be upgraded to trunking or simulcast mode by software only. One step upgrade package makes it easy to operate in different modes, analog conventional, MPT-1327, DMR conventional, DMR trunking and DMR simulcast with only one hardware platform.

DOWNLOAD BROCHURE
CONTACT US

RD98XS is a 50W, DMR and analog dual mode upgradable repeater which can work in analog and DMR conventional modes. It can be upgraded to trunking or simulcast mode by software only. One step upgrade package makes it easy to operate in different modes, analog conventional, MPT-1327, DMR conventional, DMR trunking and DMR simulcast with only one hardware platform.

Conventional Features

▪Repeater Diagnostic And Control (RDAC)
RD98XS supports Remote (via IP port to connect to internet) and Local diagnostic (via USB) PC applications to monitor, diagnose and control the repeater status, thus increasing the maintenance efficiency. Hytera developed RDAC supports multiple master network connections, allowing radio administrator to monitor multiple radio networks upcoming.

▪Analog Digital Auto switch
RD98XS supports Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and Digital users during the digital migration.

▪Analog/Digital Back-to-Back Interconnect
RD98XS supports different operating modes of analog and digital to interconnect for voice cross patch, allowing analog users to communicate with the digital users and vice versa. This allows the smooth migration from analog to the digital world.

▪Dual Slot Digital Audio Streaming
RD98XS supports streaming of both the voice slots via the rear port accessory pins, allowing third party for capability expansion.

▪IP Multi-site Connection
Multiple RD98XS repeaters can form a private radio network via IP port interconnection, allowing wide area coverage to meet data and voice communication requirements in dispersed locations.

▪Analog/Digital Telephone Interconnect (via DTMF signaling)
RD98XS supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users.

▪Analog Scan
RD98XS supports Analog voice and signaling scan, allowing repeating of different Analog voice users from various groups.

▪Multi CTCSS/CDCSS Decode
RD98XS supports decoding up to 16 CDCSS/ CTCSS types on  analog channels, allowing repeating of different analog voice users from various groups.

Upgrade to DMR Trunking Transceiver

DMR trunking Lite 2 carrier BS, including Power Distribution Unit, 2 Transceivers (RD98XS) & Transceiver Power Supply, Switch, BS PSU, Base Station Controller, 2-channel RF System.

▪Open Standard
DMR Trunking Lite is based on DMR tier III standard, defined by ETSI in 2005, which is a digital radio standard for professional radio users. With dedicated control channel, DMR Trunking Lite can achieve versatile functions.

▪Smooth Migration
DMR Trunking Lite transceiver supports smooth migration from analog to digital, from conventional to trunking. Multi-modes provide you different choices for continual investment.

▪Integrated RF System
Intergrated 2-carrier RF system, significantly reduces the space and cost for divider, combiner and duplexer.

▪Non-centralilzed Structure Design
Non-centralized structure is only used for less than 5 base stations. It ensures a cost-effective and flexible networking especially suitable for small-scale network.

Upgrade to DMR Simulcast Transceiver

DMR Simulcast Single Carrier BS, including Built-in Router, Synchronized Expansion Unit, Transceiver (RD98XS) & Power Unit & Duplexer.

▪Smooth Roaming and Handover
In simulcast system, the radio is capable of roaming and handover seamlessly between different BSs , the ongoing communication can continue normally during handover.

▪Dynamic Voting
Simulcast system can provide good voice performance in overlap area as radios in overlap area can always receive the best voice frame through dynamic voting. As a voting center, MSO is used to analyze each voice frame received from Base Stations in real time. The best voice frame will be extracted and sent to radios.

▪Analog/Digital Adaptive
Simulcast base station channels support working in both analog and digital modes, to ensure smooth migration from analog to digital network. Digital or analog mode is automatically selected based on the incoming signals.

▪Smart Subnetting and Patching
According to management requirements, DMR simulcast system can be divided into different subnets by Base Station or by time slot of channel unit in each Base Station. Each subnet can work as an independent simulcast system. Different subnets can be patched to make a larger subnet temporarily according to the requirements.

Upgrade Features

Flexible application via software or hardware upgrade:
▪Digital conventional repeater
▪DMR trunking transceiver
▪DMR trunking transceiver
▪Analog conventional repeater
▪Analog simulcast transceiver
▪MPT trunking transceiver

RD98XS, X=0,2,5,6,8,Model number varies geographically.

General

Frequency
UHF1: 400-470MHz
UHF2: 450-520MHz
UHF3: 350-400MHz
VHF:  136-174MHz
Channel Capacity 16
Channel Spacing 12.5kHz/20kHz/25kHz
Operating Voltage 13.6V±15%
Current Drain

Standby<0.8A

Transmit<11A

Frequency Stability ±0.5ppm
Antenna Impedance 50Ω
Duty Cycle 100%
Dimensions (H×W×D) 88 X 483 X 366 mm
Weight 8.5 kg
LCD Display
220*176 pixels, 262000 colors
2.0 inch, 4 rows

Transmitter

 

RF Power Output 5-50W
FM Modulation
11K0F3E @ 12.5kHz
14K0F3E @ 20kHz
16K0F3E @ 25kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD
12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission

-36dBm <1GHz

-30dBm >1GHz

Modulation Limiting

±2.5 kHz @ 12.5 kHz

±4.0 kHz @ 20 kHz

±5.0 kHz @ 25 kHz

FM Hum & Noise

40dB @ 12.5 kHz

43dB @ 20 kHz

45dB @ 25 kHz

Adjacent Channel Power

60dB@12.5kHz

70dB@20 /25kHz

Audio Response +1 ~ -3dB
Audio Distortion ≤3%
Digital Vocoder Type AMBE++ or SELP
Digital Protocol ETSI-TS102 361-1,-2,-3

Receiver

Sensitivity

Analog 0.3μV (12dB SINAD)

              0.22μV (Typical) (12dB SINAD)

              0.4μV (20dB SINAD)

Digital 0.25uV/BER5%

Adjacent Channel Selectivity
TIA-603
ETSI

65dB @ 12.5 kHz ;75dB @ 20/25 kHz

65dB @ 12.5 kHz ;75dB @ 20/25 kHz

Intermodulation
TIA-603
ETSI
75dB @ 12.5/20/25 kHz
70dB @ 12.5/20/25 kHz
Spurious Response Rejection TIA-603
ETSI

80dB @ 12.5/20/25 kHz

80dB @ 12.5/20/25 kHz

Blocking
TIA-603
ETSI

90dB

90dB

Hum and Noise

40dB @ 12.5kHz

43dB @ 20kHz

45dB @ 25kHz

 

60dB@12.5kHz

70dB@20 /25kHz

Rated Audio Power Output 0.5W
Rated Audio Distortion ≤3%
Audio Response +1 ~ -3dB
Conducted Spurious Emission <-57dBm


All specifications are subject to change without notice due to continuous development.

Live Chat