Pocket-sized, the Hytera PD355 handheld digital two-way radio delivers a range of sought after features in a small form factor, ideal for discreet use in retail, hospitality or education environments. For pricing and availability, use the link below to find and contact your local dealer.
General data | |
---|---|
Frequency Range | 430-470MHz; UHF: 400-440MHz |
Channel Capacity | 256 |
Zone Capacity | 16 |
Channel Spacing | 25/12.5KHz |
Operating Voltage | 3.7V(Rated) |
Battery | 2000mAhLi-ion battery |
Battey Life(5/5/90 Duty Cycle,High TX Power) | Analog:>10hours; Digital:>12hours |
Frequency Stability | ±0.5ppm |
Antenna Impedance | 50Ω |
Dimensions(H×W×D) mm | 123 X 55 X 23 |
Weight | 160g |
Display | Black/white LCD |
Receiver | ||
---|---|---|
Sensitivity(Analog) | Spec:< 0.28uV(-118dBm); Typical:< 0.22uV | |
Sensitivity(Digital) | Extreme:-116dBm/BER5%; Normal:-110dBm/BER1% | |
Adjacent Channel Selectivity | ETSI 60dB @ 12.5 KHz/70dB @ 25KHz; TIA-603 60dB @ 12.5 KHz/70dB @ 25KHz | |
Intermodulation | ETSI 65dB @ 12.5/25KHz; TIA-603 70dB @ 12.5/25KHz | |
Spurious Response Rejection | ETSI 70dB @ 12.5/25KHz; TIA-603 70dB @ 12.5/25KHz | |
Blocking | ETSI 84dB | |
Hum&Noise | 40dB @ 12.5KHz; 45dB @ 25KHz | |
Rated Audio Power Output | 0.4W | |
Rated Audio Distortion | ≦5% |
Transmitter | ||
---|---|---|
RF Power Output | UHF HP 3W; UHF LP 1.5W | |
FM Modulation | 11K0F3E @ 12.5KHz; 16K0F3E @ 25KHz | |
4FSK Digital Modulation | 12.5KHz Data Only 7K60FXD; 12.5KHz Data&Voice 7K60FXW | |
Conducted/Radiated Emission | -30dBm > 1GHz; -36dBm < 1GHz | |
Modulation Limiting | 2.5KHz@12.5KHz; 5.0KHz@25KHz | |
FM Hum&Noise | 40dB@12.5KHz; 45dB@25KHz | |
Adjacent Channel Power | 60dB@12.5KHz; 70dB@25KHz | |
Audio Distortion | ≦3% | |
Digital Vocoder Type | AMBE+2™ or SELP | |
Digital Protocol | ETSI-TS102 361-1,-2,-3 |
Environmental Specs | ||
---|---|---|
Operating Temperature | -30℃~+60℃ | |
Storage Temperature | -40℃~+85℃ | |
MIL Standard | MIL-STD-810 C/D/E/F/G | |
Dust & Water Protection | IP54 standard | |
Humidity | MIL-STD-810 C/D/E/F/G standard | |
Vibration,Drop&Shock | MIL-STD-810 C/D/E/F/G standard |