PD505 Lightweight, robust digital two-way radio

Handheld | DMR

Packed with functionality, the Hytera PD505 handheld digital two-way radio impresses with its safety features and flexibility to support for both digital and analogue communications, ideal for manufacturing, events and hospitality environments.

Highlights of PD505

ROAMING

This feature allows the radio to switch between sites on Multi-site Conventional and XPT systems, ensuring seamless communication.

RADIO CHECK

Allows other radio users to check if a radio is available.

PSEUDO TRUNKING IN DMO AND RMO

Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to repeater.

RRS

Radio Register Service, allowing a dispatching application to see when a radio is switched on or switched off.

STUN / UNSTUN

You can disable/enable the radio remotely, ideal if a device is lost, stolen or being misused.

EMERGENCY MODE

Raise an alarm with top priority to a base station or to other radios with the pre-programmed emergency mode, identifying the ID of the person issuing the alarm. Also receive emergency notifications.

QUICK TEXT MESSAGES

Pre-programmed via the Customer Programming Software and stored in the quick text menu ready to send to contacts.

XPT

Hytera XPT (Extended Pseudo Trunking) enables you to use limited spectrum resources more efficiently, dynamically assigning channel resource without needing a dedicated control channel.

Specifications of PD505

General data
Receiver
Transmitter
Environmental Specs

General data
Frequency Range	UHF1：400-470 MHz; UHF3：350-400 MHz; VHF：136-174 MHz
Channel Capacity	256
Zone Capacity	16
Channel Spacing	12.5 kHz/20 kHz/25 kHz
Operating Voltage	7.4V(rated)
Battery	1500 mAh (Li-ion); 2000 mAh (Li-ion)
Battey Life(5/5/90 Duty Cycle,High TX Power)	Analog/Digital: 11.5hours/16hours (1500mAh); 15.3hours/20hours (2000mAh)
Frequency Stability	±0.5ppm
Antenna Impedance	50Ω
Dimensions(H×W×D) mm	115 mm× 54 mm×27 mm(1500mAh)
Weight	260g(1500mAh)

Receiver
Sensitivity(Analog)	0.22 μV(Typical)(12 dB SIN AD); 0.3 μV (12 dB SIN AD); 0.4 μV (20 dB SIN AD);
Sensitivity(Digital)	0.22 μV/BER 5%
Adjacent Channel Selectivity	TIA-603:60 dB @ 12.5 kHz/70 dB @ 20&25 kHz; ETSI:60 dB @ 12.5 kHz/70 dB @ 20&25 kHz
Intermodulation	ETSI:65 dB @ 12.5/20/25 kHz; TIA-603:70 dB @ 12.5/20/25 kHz
Spurious Response Rejection	ETSI:70 dB @ 12.5/20/25 kHz; TIA-603:70 dB @ 12.5/20/25 kHz
Blocking	> 84 dB
Hum&Noise	40dB @ 12.5 kHz; 43dB @ 20 kHz; 45dB @ 25 kHz
Rated Audio Power Output	0.5W
Rated Audio Distortion	≤3%
Audio Response	+1~-3dB
Conducted Spurious Emission	<-57dBm

Transmitter
RF Power Output	UHF High power:4W; UHF Low power:1W; VHF High power:5W; VHF High power:1W
FM Modulation	11K0F3E @ 12.5 kHz; 14K0F3E @ 20 kHz; 16K0F3E @ 25 kHz ;
4FSK Digital Modulation	12.5 kHz Data Only:7K60FXD; 12.5 kHz Data&Voice:7K60FXW
Conducted/Radiated Emission	-30 dBm > 1GHz; -36 dBm ≤ 1GHz
Modulation Limiting	±2.5 kHz @ 12.5 kHz; ±4.0 kHz @ 20 kHz; ±5.0 kHz @ 25 kHz;
FM Hum&Noise	40 dB @ 12.5 kHz; 43 dB @ 20 kHz; 45 dB @ 25 kHz
Adjacent Channel Power	60dB @ 12.5 kHz; 70dB @ 20/25 kHz
Audio Distortion	≤3%
Digital Vocoder Type	AMBE+2™ or SELP

Environmental Specs
Operating Temperature	-30℃~+60℃
Storage Temperature	-40℃~+85℃
ESD	IEC 61000-4-2(level 4); ±15kV(Air); ±8kV(Contact)
MIL Standard	MIL-STD-810 C/D/E/F/G
Dust & Water Protection	IP54 Standard
Humidity	MIL-STD-810 C/D/E/F/G
Vibration,Drop&Shock	MIL-STD-810 C/D/E/F/G