Highlights of E-pole200
Auto networking
Up to 31 repeaters can interconnect with each other automatically without any IP link
such as fiber optic and microwave. In this network, the loss of one or more repeaters
does not affect the network operation.
Flexible installation
The all-weather repeater can be mounted on a pole (such as a lamp-post) or a wall
(such as a building wall), without relying on pre-existing infrastructure such as
an equipment room.
High compatibility
The repeater is compatible with Hytera or third-party DMR Tier 2 radios, as well as
Hytera first-generation ad-hoc products.
Multiple choice of power supplies
The repeater can be powered by the battery, solar energy, or trunking base station
(–48 V), covering scenarios.
LTE link for remote dispatch
The repeater can access the command and dispatch system through the public LTE network,
not limited to the distance.
Extended communications span
The repeater at high altitude can transmit more than 50 km thanks to the 10-watt transmitting
power. With the SIM card installed, the repeater can create networks at longer distances
and communicate with the mobile phone.
Specifications of E-pole200
- General
- Receiver
- Transmitter
- Environmental
- Location Service
| General | |
|---|---|
| Frequency Range | 400–470 MHz 136-174 MHz |
| Private network mode | DMR conventional (Tier II) |
| Node Capacity | 31 |
| Channel Spacing | 12.5 kHz |
| Battery | 48 V DC |
| Current Drain (Standby) | < 1 A |
| Current Drain (Transmitting) | 1.5 A @1W 2 A @5W 2.5 A @10W |
| Frequency Stability | ±0.5 ppm |
| Antenna Impedance | 50 Ω |
| Dimensions(H×W×D) mm | 238.0 mm x 138.2 mm x 330.9 mm |
| Weight | 5.2 kg |
| Receiver | ||
|---|---|---|
| RX Sensitivity(Static) | –122 dBm @5%BER | |
| Adjacent Channel Selectivity | ETSI: 60 dB @12.5 kHz/70 dB@25 kHz | |
| Intermodulation | ≥ 70 dB | |
| Spurious Response Rejection | ≥ 70 dB | |
| Blocking | 84 dB | |
| Conducted Spurious Emission | -57 dBm (@ 9 kHz to 1 GHz) -47 dBm (@ 1 GHz to 12.75 GHz) | |
| Transmitter | ||
|---|---|---|
| Power Output | 1W / 5W / 10W per channel 20W in total | |
| Adjacent Channel Power | 60 dB @12.5 kHz 70 dB @25 kHz | |
| Vocoder Type | AMBE+2™/NVOC | |
| Environmental | ||
|---|---|---|
| Operating Temperature | –30°C to +60°C | |
| Storage Temperature | –40°C to +85°C | |
| ESD | IEC 61000-4-2 (level 4) ±8 kV (contact discharge) ±15 kV (air discharge) | |
| Dust & Water Protection | IP65 | |
| Humidity | MIL-STD-810 C/D/E/F/G | |
| Vibration,Drop&Shock | MIL-STD-810 C/D/E/F/G | |
| Location Service | ||
|---|---|---|
| GNSS | GPS | |
| TTFF (time to first fix) cold start | < 1 minute | |
| TTFF (time to first fix) hot start | < 1 second | |
| Horizontal position accuracy | < 10 meters | |
| Note | Suitable for long-term tracking (5 satellites visible at the rated signal strength of -130 dBm) | |
* Die auf dieser Seite gezeigten Produktbilder, Spezifikationen, Funktionen und Zubehörteile können aufgrund fortlaufender Technologie-Upgrades und Produktionsverbesserungen Änderungen unterliegen. Um sicherzustellen, dass Sie das korrekte Produkt und kompatibles Zubehör erhalten, kontaktieren Sie bitte vor Bestellung das Hytera-Verkaufsteam für die neuesten Informationen. Hytera behält sich das Recht vor, Produktdetails ohne vorherige Ankündigung zu ändern.